apl. Prof. Dr.-Ing. habil. János Zierath

Außerplanmäßiger Professor für Strukturdynamik

János Zierath studierte von 2001 bis 2006 an der Universität Rostock "Angewandte Mechanik" mit den Vertiefungsfächern Strukturdynamik und Technische Dynamik. Von 2006 bis 2010 war er als wissenschaftlicher Mitarbeiter am Lehrstuhl Technische Mechanik/Dynamik beschäftigt. In seiner Promotion (2011) im Fachgebiet "Numerische Mechanik" beschäftigte er sich mit Stoß- und Kontaktproblemen durch eine Co-Simulation von Randelement- und Mehrkörperprogrammen.

Seit 2011 ist er als Berechnungs- und Vermessungsingenieur in der Windkraftbranche beschäftigt. Seine Tätigkeitsgebiete umfassen die allgemeine Mehrkörpersimulation, den Reglerentwurf, die Software- und Prüfstandsentwicklung und die Vermessung von Prototypen. Außerdem leitet er Verbundvorhaben mit verschiedenen Universitäten.

Darüber hinaus hält János Zierath seit 2012 Lehraufträge im Fach "Elastische Mehrkörpersystem" an der Fakultät für Maschinenbau und Schiffstechnik der Universität Rostock und von 2016 bis 2017 in "Mechanics 3" und "Strukturdynamik" an der Fakultät für Ingenieurwissenschaften der Universität Duisburg-Essen. Im Dezember 2014 habilitierte er auf dem Gebiet "Technische Mechanik" mit seiner Habilitationsschrift "Dynamik elastischer Mehrkörpersysteme - Theorie, Entwurf, Regelung, Messung und Validierung am Beispiel von Windenergieanlagen".

Seit 2010 ist er Mitglied im Fachausschuss "Vibrationen und Geräusche" der Schiffbautechnischen Gesellschaft. Außerdem hat János Zierath im Jahr 2012 den Arbeitskreis "Jugend und Technik" im Bezirksverein Mecklenburg-Vorpommern des Vereins Deutscher Ingenieure (VDI) übernommen und ist seit 2014 gewähltes Mitglied des Bezirksvorstandes Mecklenburg Vorpommern. In dieser Funktion verantwortet er unter anderem die Organisation des landesweiten "Tages der Technik". Weitere Information unter www.tdt-mv.de

Forschungsprojekte

  1. 2011 - 2014: Neuentwicklung einer Windkraftanlage >/= 3,0 MW für den On- und den Offshoreeinsatz auf Basis des von W2e Wind to Energy GmbH patentierten Triebstrangkonzeptes Larus Compact - Verbundvorhaben mit dem Lehrstuhl für Technische Mechanik/Dynamik der Universität Rostock gefördert vom BMU/BMWi
  2. 2014 - 2016: CoLoRWind - Control Development for Load Reduction on Wind Turbines. Teilvorhaben: Entwicklung eines Mehrkörpermodell-basierten Echtzeit HiL-Teststandes für realitätsgetreue Reglertests an Windenergieanlagen - Verbundvorhaben mit dem Institut für Regelungstechnik am Center of Windpower Drives CWD der RWTH Aachen gefördert vom BMWi im Rahmen des Zentralen Innovationsprogramms Mittelstand (ZIM)
  3. 2015 - 2018: FetConWind - Umrichter für Windenergieanlagen mit verbesserten Fehler- und Netzverhalten. Teilvorhaben: Systemevaluation durch Mehrkörpersimulation - Verbundvorhaben mit dem Institut für Elektrische Energietechnik der Universität Rostock und der Siemens AG gefördert vom BMWi
  4. 2015 - 2018: DynAWind - Leichtbauoptimierte Konstruktionen von Windenergieanlagen - Verbundvorhaben mit dem Lehrstuhl für Technische Mechanik/Dynamik der Universität Rostock gefördert vom BMWi
  5. 2017 - 2019: koRola - Verfahren zur kombinierten Rekonstruktion und Reduktion von Rotorlasten an Windenergieanlagen - Verbundvorhaben mit dem Institut für Regelungstechnik am Center of Windpower Drives CWD der RWTH Aachen gefördert vom BMBF im Rahmen des Förderprogramms KMU innovativ
  6. 2019 - 2021: DynAWind² - Modellgestützte, minimalsensorische strukturelle Überwachung von Windenergieanlagen - Verbundvorhaben mit dem Lehrstuhl für Technische Mechanik/Dynamik, dem Lehrstuhl für Strukturmechanik der Universität Rostock und der WINDnovations Engineering Solutions GmbH Berlin gefördert vom BMWi
  7. 2019 - 2020: WindPioneer – Ertüchtigung einer modellprädiktiven Windenergieanlagenregelung für den Prototypentest - Verbundvorhaben mit dem Institut für Regelungstechnik am Center of Windpower Drives CWD der RWTH Aachen

Veröffentlichungen

Monographien

Monographien

  1. Zierath, J.: Dynamik elastischer Mehrkörpersysteme - Theorie, Entwurf, Regelung, Messung und Validierung am Beispiel von Windenergieanlagen (Habilitationsschrift). Dynamics of Flexible Multibody Systems - Theory, Modelling, Control, Measurement and Validation by the Application on Wind Energy Conversion Systems. Rostocker Schriften zur Angewandten Mechanik, Band 5, Verlag Dr. Hut, München, 2015.
  2. Zierath, J.: Modelling of Three-Dimensional Contacts by Coupled Multi-body- and Boundary-Element-Systems (Dissertation). Rostocker Schriften zur Angewandten Mechanik, Band 1, Verlag Dr. Hut, München 2011.
Zeitschriftenbeiträge (peer reviewed)

Zeitschriftenbeiträge (peer reviewed)

  1. Rachholz, R.; Bartkowiak, R.; Schulze, A.; Luthe, J.; Zierath, J.; Woernle, C.: Development of a dynamically scaled wind turbine. In Journal of Physics: Conference Series 1037(2018), pp. 052033, from TORQUE 2018 „The Science from Making Torque of Wind“, Mailand, Italy, 2018.
  2. Schulze, A.; Zierath, J.; Rosenow, S.-E.; Bockhahn, R.; Rachholz, R.; Woernle, C.: Passive structural control techniques for a 3 MW wind turbine prototype. In Journal of Physics: Conference Series 1037(2018), pp. 042024, from TORQUE 2018 „The Science from Making Torque of Wind“, Mailand, Italy, 2018.
  3. Zierath, J.; Rachholz, R.; Rosenow, S.-E.; Bockhahn, R.; Schulze, A.; Woernle, C.: Experimental Identification of Modal Parameters of an Industrial 2 MW Wind Turbine. In Wind Energy 21: 338-356, John Wiley & Sons, West Sussex, England, 2018. DOI: 10.1002/we.2165
  4. Jassmann, U.; Dickler, S.; Zierath, J.; Abel, D.: Model Predictive Wind Turbine Control with Move-Blocking Strategy for Load Alleviation and Power Leveling. In Journal of Physics: Conference Series 753(5), pp. 052021, from TORQUE 2016 „The Science from Making Torque of Wind“, Munich, Germany, 2016.
  5. Schulze, A.; Zierath, J.; Rosenow, S.-E.; Bockhahn, R.; Rachholz, R.; Woernle, C.: Optimal Sensor Placement for Modal Testing on Wind Turbines. In Journal of Physics: Conference Series 753(7), pp. 072031, from TORQUE 2016 „The Science from Making Torque of Wind“, Munich, Germany, 2016.
  6. Zierath, J.; Rachholz, R.; Woernle, C.: Field Test Validation of Flex5, MSC.Adams, alaska/Wind and SIMPACK for Load Calculations on Wind Turbines, In Wind Energy 19:1201-1222, John Wiley & Sons, West Sussex, England, 2016. DOI:10.1002/we.1892
  7. Herrmann, S.; Kluess, D.; Kaehler, M.; Grawe, R.; Rachholz, R.; Souffrant, R.; Zierath, J.; Bader, R.; Woernle, C.: A Novel Approach for Dynamic Testing of Total Hip Dislocation under Physiological Conditions, In PLoS ONE 10(12):e0145798, December 2015. DOI: 10.1371/journal.pone.0145798
  8. Herrmann, S.; Woernle, C.; Kähler, M.; Rachholz, R.; Souffrant, R.; Zierath, J.; Kluess, D.; Bader, R.: HiL Simulation for Testing Joint Stability after Total Knee Arthroplasty. Multibody System Dynamics (2012) 28:55–67.
  9. Herrmann, S.; Kähler, M.; Souffrant, R.; Rachholz, R., Zierath, J.; Kluess, D.; Mittelmeier, W.; Woernle, C.; Bader, R.: HiL simulation in biomechanics: A new approach for testing total joint replacements. Computer Methods and Programs in Biomedicine 105(2) (2012) 109–119.
  10. Herrmann, S.; Rachholz, R.; Souffrant, R.; Kähler, M; Zierath, J.; Kluess, D.; Woernle, C.; Bader R.: A Real-Time Musculoskeletal Model for the Hardware-in-the-Loop Joint Simulator. In Proceedings of International Conference on Orthopaedic Surgery, Biomechanics and Clinical Applications, Journal of Biomechanics (2010), 43(1), S. 24-25.
  11. Zierath, J.; Woernle, C.; Heyden, T.: Elastic Multibody Models of Transport Aircraft High-Lift Mechanisms. Journal of Aircraft (AIAA) (2009), 46(5), S. 1513-1524.
Buchkapitel (peer reviewed)

Buchkapitel (peer reviewed)

  1. Zierath, J.; Kallen, T.; Machost, D.; Bockhahn, R.; Konrad, T.; Rosenow, S.-E.; Jassmann, U.; Abel, D.: (2020) An Individual Pitch Control Concept for Wind Turbines Based on Inertial Measurement Units. In: Kecskeméthy A., Geu Flores F. (eds) Multibody Dynamics 2019. Computational Methods in Applied Sciences, vol 53. Springer, Cham, 2020.
  2. Luthe, J.; Schulze, A.; Rachholz, R.; Zierath, J.; Woernle, C.: State observation in beam-like structures under unknown excitation. In: Kecskeméthy A., Geu Flores F. (eds) Multibody Dynamics 2019. Computational Methods in Applied Sciences, vol 53. Springer, Cham, 2020.
  3. Schulze, A.; Luthe, J.; Zierath, J.; Woernle, C.: Investigation of a Model Update Technique for Flexible Multibody Simulation, In: Kecskeméthy A., Geu Flores F. (eds) Multibody Dynamics 2019. Computational Methods in Applied Sciences, vol 53. Springer, Cham, 2020.
  4. Zierath, J.; Rachholz, R.; Woernle, C.: Comparison and Field Test Validation of Various Multibody Codes for Wind Turbine Modelling, In Multibody Dynamics: Computational Methods and Applications (Computational Methods in Applied Sciences), Zdravko Terze (Ed.), Springer, Berlin, 2014.
  5. Zierath, J.; Woernle, C.: Contact Modelling in Multibody Systems by Means of a Boundary Element Co-simulation and a Dirichlet-to-Neumann Algorithm, In Multibody Dynamics: Computational Methods and Applications (Computational Methods in Applied Sciences), J.-C. Samin and P. Fisette (Eds.), Springer, Berlin, 2013.
  6. Zierath, J.; Schlottmann, G.; Rosenow, S.-E.; Uhlenbrock, S.: Berechnung optimaler Sensorpositionen bei Anwendung der operativen Modalanalyse an Containerschiffen. Optimal Sensor Placement for Operational Modal Analysis on Container Vessels. Jahrbuch der Schiffbautechnischen Gesellschaft Band 100 (2006), pp.66-71.
Konferenzbeiträge (peer reviewed)

Konferenzbeiträge (peer reviewed)

  1. Dickler, S.; Kallen, T.; Zierath, J.; Abel, D.: Rapid Control Prototyping of Model Predictive Wind Turbine Control Towards Field Testing, To appear in Proceedings of the EAWE’s Science of Making Torque from Wind (TORQUE) Conference, Delft, The Netherlands, 2020. (accepted)
  2. Kallen, T.; Zierath, J.; Dickler, S.; Konrad, T.; Jassmann, U.; Abel, D.: Repetitive Individual Pitch Control for Load Alleviation at Variable Rotor Speed, To appear in Proceedings of the EAWE’s Science of Making Torque from Wind (TORQUE) Conference, Delft, The Netherlands, 2020. (accepted)
  3. Zierath, J.; Luthe, J.; Schulze, A.; Rosenow, S.-E.; Saalbach, C.; Sander, M.; Woernle, C.: Structural Fatigue Monitoring Concept for Wind Turbines By Means Of Digital Twins, In Proceedings of the International Modal Analysis Conference (IMAC), Houston, Texas, 2020.
  4. Schulze, A.; Luthe, J.; Zierath, J.; Rosenow, S.-E.; Woernle, C.: A Concept for the Estimation of Displacement Fields in Flexible Wind Turbine Structures, In Proceedings of the International Modal Analysis Conference (IMAC), Houston, Texas, 2020.
  5. Schulze, A.; Luthe, J.; Rosenow, S.-E.; Zierath, J.; Woernle, C.: Utilization of Experimental Data in Elastic Multibody Simulation: Case Study on the Ampair 600 Turbine Blade, In Proceedings of the International Modal Analysis Conference (IMAC), Houston, Texas, 2020.
  6. Schulze, A.; Luthe, J.; Zierath, J.; Rosenow, S.-E.; Bockhahn, R.; Rachholz, R.; Woernle, C.: Modal testing on a 2 MW wind turbine rotor blade, In Proceedings of the International Operational Modal Analysis Conference (IOMAC), Copenhagen, Denmark, 2019.
  7. Schulze, A.; Woernle, C.; Zierath, J.: Weiterentwicklung eines Model-Update-Ansatzes flexibler Mehrkörpersysteme, Fünfte IFToMM D-A-CH Konferenz 2019, Aachen, Deutschland, 2019.
  8. Woernle, C.; Rachholz, R.; Schulze, A.; Luthe, J.; Zierath, J.: Multibody modelling and experimental identification of wind turbines, In Proceedings of 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics GAMM, Vienna, Austria, 2019.
  9. Hein, Y.; Gierschner, S.; Hammes, D.; Kayser, F.; Eckel, H.-G.; Zierath, J.; Krug, D.: Reduction of negative effects of a short circuit through improved converter topology for wind energy applications, In Proceedings of EPE 2018 ECCE EUROPE, 20th EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, Riga, Latvia, 2018.
  10. Zierath, J.; Bockhahn, R.; Rachholz, R.; Rosenow, S.-E.; Schulze, A.; Woernle, C.; Weber, W.: IMU-based Identification of Modal Parameters on an Industrial 3 MW Wind Turbine, In Proceedings of Wind Europe Summit 2018, Hamburg, Germany, 2018.
  11. Schulze, A.; Zierath, J.; Rachholz, R.; Bockhahn, R.; Rosenow, S.-E.; Luthe, J.; Woernle, C.: Experimental dynamic substructuring on a 3MW wind turbine. In Proceedings of the IUTAM Symposium on Model Order Reduction of Coupled Systems, Stuttgart, Germany, 2018.
  12. Schulze, A.; Zierath, J.; Rachholz, R.; Woernle, C.: Vibration mitigation of a 3 MW wind turbine through passive structural control. In Proceedings of the IMSD 2018 - The 5th Joint International Conference on Multibody System Dynamics, Lisboa, Portugal, 2018.
  13. Zierath, J.; Bockhahn, R.; Rachholz, R.; Rosenow, S.-E.; Schulze, A.; Luthe, J.; Woernle, C.: A Measurement and Signal Processing Concept for the Dynamic Analysis of Operating Wind Turbines. In Proceedings of the IMSD 2018 - The 5th Joint International Conference on Multibody System Dynamics, Lisboa, Portugal, 2018.
  14. Luthe, J.; Schulze, A.; Rachholz, R.; Zierath, J.; Woernle, C.: Acceleration-based strain estimation in a beam-like structure. To appear in Proceedings of the IMSD 2018 - The 5th Joint International Conference on Multibody System Dynamics, Lisboa, Portugal, 2018.
  15. Zierath, J.; Bockhahn, R.; Rachholz, R.; Rosenow, S.-E.; Schulze, A.; Luthe, J.; Woernle, C.: Operative Modalanalyse an Windenergieanlage der 2 MW- und 3 MW-Klasse, 9. VDI-Fachtagung Schwingungen von Windenergieanlagen 2018, Schwingungsmessungen und datengeführte Signalanalyse, Bremen, Germany, 2018.
  16. Zierath, J.; Rosenow, S.-E.; Rachholz, R.; Bockhahn, R.; Schulze, A.; Woernle, C.: Experimental Identification of Modal Parameters of a Wind Turbine and Comparison to Multibody Simulations, In Proceedings of DEWEK 2017-13th German Wind Energy Conference, Bremen, Germany, 2017.
  17. Dickler, S.; Jassmann, U.; Abel, D.; Zierath, J.: Hardware-in-the-Loop-Simulation zur Evaluierung einer Modellbasierten Prädiktiven Regelung für Windenergieanlagen. In Proceedings of AUTOMATION 2017, 18. Leitkongress der Mess- und Automatisierungstechnik, Baden-Baden, Germany, 2017.
  18. Schulze, A.; Zierath, J.; Rachholz, R.; Rosenow, S.-E.; Bockhahn, R.; Woernle, C.: Modelling and Validation of a 3 MW Wind Turbine as a Basis for Structural Optimisation, In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, Prague, Czech Republic, 2017.
  19. Zierath, J.; Rachholz, R.; Rosenow, S.-E.; Bockhahn, R.; Schulze, A.; Woernle, C.: Modal Testing on Wind Turbines for Validation of a Flexible Multibody Model, In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, Prague, Czech Republic, 2017.
  20. Rachholz, R.; Zierath, J.; Rosenow, S.-E.; Bockhahn, R.; Schulze, A.; Woernle, C.: Application of Operational Modal Analysis Techniques to Wind Turbines, In Proceedings of the International Operational Modal Analysis Conference (IOMAC), Ingolstadt, Germany, 2017.
  21. Zierath, J.; Jassmann, U.; Dickler, S.; Abel, D.: Experiences with Model Predictive Control for the W2E-120/3.0fc, Wind Europe Summit 2016, Hamburg, Germany, 2016.
  22. Jassmann, U.; Zierath, J.; Dickler, S.; Hakenberg, M.; Abel, D.: Model Predictive Wind Turbine Control for Load Alleviation and Power Leveling in Extreme Operation Conditions, In Proceedings of MSC 2016 „2016 IEEE Multi-Conference on Systems and Control“, Buenos Aires, Argentina, 2016.
  23. Zierath, J.; Jassmann, U.; Dickler, S.; Abel, D.: Testing Model Predictive Control Algorithms for Wind Turbine Control by Means of a Hardware-in-the-Loop Test Rig, In Proceedings of the IMSD 2016 - The 4th Joint International Conference on Multibody System Dynamics, Montreal, Canada, 2016.
  24. Zierath, J.; Jassmann, U.; Weber, F.: Hardware-in-the-Loop Test Rig for Wind Turbine Control Using Model Predictive Control Algorithms. AWEA Windpower 2016, New Orleans, USA, 2016.
  25. Zierath, J.; Jassmann, U.; Abel, D., Weber, F.: Introduction of Model Predictive Control for Load Reduction on a 3.0 MW Wind Turbine, In Proceedings of Brazil Wind Power 2015, Rio de Janeiro, Brazil, 2015.
  26. Luthe, J.; Woernle, C.; Zierath, J.: A simulation concept for the azimuth system of horizontal axis wind turbines, In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, Barcelona, Spain, 2015.
  27. Zierath, J.; Jassmann, U.; Abel, D.: Capabilities of Model Predictive Control for Load Reduction on Wind Turbines, In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, Barcelona, Spain, 2015.
  28. Zierath, J.; Rachholz, R.; Woernle, C.; Müller, A.: Load Calculation on Wind Turbines: Validation of Flex5, alaska/Wind, MSC.Adams and SIMPACK by means of Field Tests, In Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2 nd Biennial International Conference on Dynamics for Design (DFD), Buffalo, New York, USA, 2014, paper No. DETC2014-34670.
  29. Herrmann, S.; Kähler, M.; Souffrant, R.; Zierath, J.; Kluess, D.; Woernle, C.; Bader, R.: Dynamic testing of artificial hip joint stability under physiological conditions. In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, Zagreb, Croatia, 2013.
  30. Zierath, J.; Rachholz, R.; Woernle, C.: Comparison and Validation of different Multibody Codes for Wind Turbine Modelling. In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, Zagreb, Croatia, 2013.
  31. Woernle, C.; Kähler, M.; Rachholz, R.; Zierath, J.; Herrmann, S.; Souffrant, R.; Kluess, D.; Bader, R.: Robot-Based Testing of Total Joint Replacements, In Multibody System Dynamics, Robotics and Control, H. Gattringer and J. Gerstmayr (Eds.), Springer, Wien, 2013.
  32. Rachholz, R.; Woernle, C.; Zierath, J.: Dynamics of a Controlled Flexible Multibody Model of a 2 MW Wind Turbine. Proceedings of the IMSD2012 - The 2nd Joint International Conference on Multibody System Dynamics, May 29 - June 1, 2012 Stuttgart, Germany, P. Eberhard and P. Ziegler (Eds.).
  33. Kähler, M.; Rachholz, R.; Herrmann, S.; Zierath, J.; Souffrant, R.; Kluess, D.; Bader, R.; Woernle, C.: Model-Based Dynamic Analysis of Total Hip Endoprostheses by Means of Hardware-in-the-Loop Simulation. Proceedings of the IMSD2012 - The 2nd Joint International Conference on Multibody System Dynamics, May 29 - June 1, 2012 Stuttgart, Germany, P. Eberhard and P. Ziegler (Eds.).
  34. Kähler, M.; Herrmann, S.; Rachholz, R.; Souffrant, R.; Zierath, J.; Kluess, D.; Bader, R.; Woernle, C.: Funktions- und Steuerungsprinzip eines universellen HiL-Simulators für Gelenkendoprothesen. In Automatisierungstechnische Verfahren für die Medizin, AUTOMED 2012, Steffen Leonhardt, Dirk Abel und Klaus Rademacher (Eds.), Fortschritt-Berichte VDI, VDI Verlag, Düsselorf, 2012.
  35. Herrmann, S.; Kähler, M.; Rachholz, R.; Souffrant, R.; Zierath, J.; Kluess, D.; Woernle, C.; Bader, R.: Hardware-in-the-loop Simulation of Total Hip and Knee Replacements using Musculoskeletal Modelling and an Industrial Robot. Proceedings of the First International Symposium on Numerical Simulation in Orthopaedic Biomechanics, SimOrtho, Daniel Kluess, Wolfram Mittelmeier and RainerBader (Eds.), University of Rostock, Department of Orthopaedics, Rostock, 2011.
  36. Zierath, J.; Woernle, C.: Development of a Dirichlet-to-Neumann Algorithm for Contact Analysis in Boundary Element Systems and its Application to MBS-BEM Co-Simulation. In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, J.-C. Samin and P. Fisette (Eds.), Brussels, Belgium, 2011.
  37. Herrmann, S.; Woernle, C.; Kähler, M.; Rachholz, R.; Souffrant, R.; Zierath, J.; Kluess, D.; Bader R.: HiL Simulation for Testing Joint Stability after Total Knee Arthroplasty. Proceedings of Euromech Colloquium 511 on Biomechanics of Human Motion, Ponta Delgada, Azores, 2011.
  38. Herrmann, S.; Souffrant, R.; Lenz, R.; Tischer, T.; Zierath, J.; Lehner, S.; Kluess, D.; Woernle, C.; Bader, R.: Aufbau eines muskuloskelettalen Modells des Patellofemoralgelenkes zur Untersuchung der Patellakinematik. Proceedings of I. Münchner Symposion für Experimentelle Orthopädie, Unfallchirurgie und Muskuloskelettale Forschung (2011).
  39. Herrmann, S.; Rachholz, R.; Souffrant, R.; Kähler, M.; Zierath, J.; Wieding, J.; Kluess, D.; Woernle, C.; Bader, R.: Verification of a Joint Simulator for Total Hip Dislocation using an Industrial Robot. In Proceedings of the 7th Combined Meeting of the Orthopaedic Research Societies, Kyoto, Japan, 2010.
  40. Herrmann, S.; Souffrant, R.; Lenz, R.; Tischer, T.; Zierath, J.; Lehner, S.; Kluess, D.; Woernle, C.; Bader, R.: Development of a Three-Dimensional Musculoskeletal Model for the Hardware-in-the-Loop Joint Simulation. In IFMBE Proceedings 31, 6th World Congress of Biomechanics (WCB 2010), C. T. Lim and J.C.H. Goh (Eds.), 2010, S. 557-560, Springer, Berlin.
  41. Woernle, C.; Kähler, M.; Rachholz, R.; Herrmann, S.; Zierath, J.; Souffrant, R.; Bader, R.: Robot-Based HiL Test of Joint Endoprostheses. In Advances in Robot Kinematics: Motion in Man and Machine, Jadran Lenarcic and M. M. Stanisić (Eds.), 2010, S. 521-528, Springer, Berlin.
  42. Kähler, M.; Rachholz, R.; Herrmann, S.; Zierath, J.; Souffrant, R.; Kluess, D.; Bader, R.; Woernle, C.: Development of a Biomechanical Multibody Model for the Hardware-in-the-Loop Simulation of Total Hip Endoprostheses. Proceedings of the IMSD 2010 - The 1 st Joint International Conference on Multibody System Dynamics, May 25 - May 27, 2010 Lappeenranta, Finland, Aki Mikkola and Werner Schiehlen (Eds.).
  43. Zierath, J.; Woernle, C.: Elastic Contact Analyses with Hybrid Boundary Element/Multibody Systems. Proceedings of the IMSD 2010 - The 1st Joint International Conference on Multibody System Dynamics, May 25 - May 27, 2010, Lappeenranta, Finland, Aki Mikkola and Werner Schiehlen (Eds.).
  44. Zierath, J.; Woernle, C.: Modeling Smooth Contacts in Elastic Multibody Systems. In Proceedings of Eccomas Thematic Conference on Multibody Dynamics, J. Frączek and M. Wojtyra (Eds.), Warsaw, Poland, 2009.
  45. Heyden, T.; Woernle, C.; Winter, E.; Zierath, J.: Anwendung elastischer Mehrkörpersysteme in der Hochauftriebs-Entwicklung von Verkehrsflugzeugen. PAMM (2008), 8(1), S. 10121-10122.
  46. Zierath, J.; Woernle, C.; Heyden, T.: Simulation der Dynamik des Vorflügelsystems von Transportflugzeugen mit Hilfe elastischer Mehrkörpermodelle. PAMM (2008), 8(1), S. 10165-10166.
Abschlussberichte

Abschlussberichte

  1. Schulze, A; Rachholz, R.; Woernle, C.; Zierath, J.: Schlussbericht: DynAWind – Leichtbauoptimierte Konstruktion von Windenergieanlagen (FKZ 0325228C/D), Verbundprojekt (W2E Wind to Energy & Universität Rostock), Bundesministerium für Wirtschaft und Energie, Technische Informationsbibliothek Hannover, 2019.
  2. Eckel, H.-G.; Hammes, D.; Gierschner, S.; Hein, Y.; Kayser, F.; Schütt, T.; Zierath, J.; Krug, D.: Schlussbericht: FetConWind - Umrichter für Windenergieanlagen mit verbessertem Fehler- und Netzverhalten (FKZ 0325789A/B), Verbundprojekt (Universität Rostock, W2E Wind to Energy & SIEMENS), Bundesministerium für Wirtschaft und Energie, Technische Informationsbibliothek Hannover, 2018.
  3. Zierath, J.; Rosenow, S.-E.; Schütt, T.: Schlussbericht: Neuentwicklung einer Windkraftanlage >/= 3,0 MW für den On- und den Offshoreeinsatz auf Basis des von W2E Wind to Energy GmbH patentierten Triebstrangkonzeptes „Larus Compact“ (FKZ 0325228A), Verbundprojekt (W2E Wind to Energy & Universität Rostock), Bundesministerium für Wirtschaft und Energie, Technische Informationsbibliothek Hannover, 2015.
Weitere Beiträge (non peer reviewed)

Weitere Beiträge (non peer reviewed)

  1. Schulze, A.; Rachholz, R.; Woernle, C.; Zierath, J.: Modellierung und Identifikation des dynamischen Verhaltens von Windenergieanlagen, 8. Zukunftskonferenz: Wind & Maritim 2019, Rostock, 2019.
  2. Schulze, A.; Woernle, C.; Zierath, J.: Mehrkörpermodellierung und Validierung einer 3 MW Windturbine, 9. SAXSIM - SAXON SIMULATION MEETING, 9. Anwendertreffens an der Technischen Universität Chemnitz, Chemnitz, 2017.
  3. Rachholz, R.; Woernle, C.; Zierath, J.: Load Calculation on Wind Turbines: An Experimental Validation of the Multibody Codes MSC.Adams and Simpack. In Proceedings of the 5 th GACM Colloquium on Computational Mechanics, Hamburg, 2013.
  4. Rachholz, R.; Woernle, C.; Zierath, J.: Experimental Validation of a 2 MW Wind Turbine Simulation Model, In SIMPACK News, Gilching, August 2014.
  5. Rachholz, R.; Kähler, M.; Zierath, J.; Woernle, C.; Herrmann, S.; Souffrant, R.; Kluess, D.; Bader, R.: Musculoskeletal Multi-Body Modeling used for Hardware-in-the-Loop Simulations, In SIMPACK News, 18-20, Gilching, Dezember 2011.
Patentanmeldung und Gebrauchsmuster

Patentanmeldung und Gebrauchsmuster

  1. Stolpe, E.; Dehne, N.; Köhnke, L.; Holzhausen, T.; Baum, J; Bockhahn, R.; Rosenow, S.-E.; Zierath, J.: Vorrichtung zum Ausrichten von Windenergieanlagen, Nr. 20 2018 105 055, Deutsches Patent- und Markenamt, München, September 2018.
  2. Zierath, J.; Bockhahn, R.; Rosenow, S.-E.; Jassmann, U.; Abel, D.: Verfahren zur Rekonstruktion und Reduktion von Rotorlasten an Windenergieanlagen und Vorrichtung zur Durchführung des Verfahrens, DE 10 2017 121 082.2, Anmelder: W2E Wind to Energy GmbH, Deutsches Patent- und Markenamt, München, September 2017.

Kontakt

Universität Rostock
Lehrstuhl für
Technische Mechanik / Dynamik
Justus-von-Liebig-Weg 6
D-18059 Rostock, Deutschland

Mail: janos.zierath@uni-rostock.de
Telefon: +49 381 453786-08
Fax: +49 381 453786-10

http://www.wind-to-energy.de